VIA HyperionPro Driver(5.x)Installation Guide
Updated:
.
Application License Agreement
About the function of VIA MACHINE INF package, I list below:
l Installing NB driver which the hardware ID of NB still not check-in to OS.
l Installing AGP driver which the hardware ID of AGP still not check-in to OS.
l Installing SB driver which the hardware ID of SB still not check-in to OS.
l Installing VPX driver which the hardware ID of VPX still not check-in to OS.
l Installing special drivers on our new chip.
The VIA AGP is a software package that enables AGP bus feature of VIA north bridge chipsets for Windows® platform system.
The VIA MiniIDE Driver Package (VIA PATA/SATA IDE Driver Package) is new in March 2006.
Benefits: End-users can enjoy the benefits of the SATA Hot-Plug feature, where a SATA drive can be hot-plugged, detected and used much in the same way as a USB hard drive. This feature is supported under Windows 2000 and later operating systems.
Limitations:
Users with legacy operating systems (Windows NT4.0, Windows 98SE, Windows ME ) need to set their SATA controller to RAID mode in their BIOS and then use VIA V-RAID driver package.
This "VIA RAID Software Package" is used to install the drivers and utility which are needed for using the VIA VT6410, VT6421, VT8251, VT8237/A SATA RAID controller.
n VT6410 IDE/RAID Adapter
u It is a RAID controller that supports RAID 0, 1, 0+1 and JBOD.
u It also supports up to four IDE hard disk drives.
n VT6421 SATA RAID Adapter
u It supports two SATA HDDs + Two IDE HDDs.
u It supports RAID 0, 1, 0+1 and JBOD functions.
n VT8237(x) South Bridge SATA IDE/RAID Controller
u It is a south bridge which includes VT6420 SATA controller so this software package also supports VT8237 SATA controller.
u It supports RAID 0, 1, and JBOD functions.
n VT8251 South Bridge SATA IDE/AHCI/RAID Controller
u It supports four SATA connections to be configured as one of IDE, AHCI or RAID mode controller.
u It supports RAID 0, 1, 0+1, 5 and JBOD functions. The RAID 5 is a software RAID technology applied CPU resource to archive RAID 5.
Note : VIA VT8251 SATA/Raid/AHCI function is not ready under Windows 9x and the supported platforms as follows .
The supported platforms :
Windows 2000 RTM
and above
Windows XP RTM
and above
Windows Server 2003 RTM and above
Windows XP-x64 RTM
and above
Windows Server 2003 SP1-x64 RTM and above
Please
read carefully before you download, install, or use any VIA SOFTWARE. VIA
SOFTWARE means the software program you are currently trying to download, and
all related updates supplied by VIA Technologies, Inc. (VIA).
By clicking on the I ACCEPT button, and by downloading and installing the VIA
SOFTWARE, you accept all the terms and conditions of this Agreement. If you do not agree to the terms and
conditions of this Agreement, do not click the “I ACCEPT” button or use the VIA
SOFTWARE.
Upon
your acceptance of this Agreement, subject to the terms and conditions set
forth herein, VIA hereby grants to you a limited, non-exclusive,
non-transferable, worldwide license to use the VIA SOFTWARE as follows:
1.
Use of Software. The VIA SOFTWARE is licensed for personal use and may
only be used in conjunction with VIA products. If you wish to use the VIA SOFTWARE for commercial or any other purpose,
please contact VIA directly.
2.
Restrictions. You are not allowed to
modify, disassemble, decompile, or reverse-engineering the VIA SOFTWARE, or
remove any proprietary
notice or
label on the VIA SOFTWARE. You
may not transfer or distribute this software to any third party.
3.
Ownership and
Copyrights. The VIA SOFTWARE and the
accompanying documentation are licensed, not sold, to you. All title and
copyrights in and to the VIA SOFTWARE (including but not limited to all images,
photographs, animations, video, audio, music, text, and other
information incorporated into the VIA SOFTWARE), the accompanying printed
materials, and any copies of the VIA SOFTWARE, are owned by VIA, or its third
party suppliers. The VIA SOFTWARE is
protected by copyright laws and international treaty provisions.
4.
Disclaimer of Warranty. VIA MAKES NO REPRESENTATIONS ABOUT THE
SUITABILITY, USE, OR PERFORMANCE OF THE VIA SOFTWARE FOR ANY
PURPOSE. THE VIA SOFTWARE IS PROVIDED "AS IS," AND VIA DISCLAIMS, TO
THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW, ALL EXPRESS OR IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT WITH RESPECT TO THE VIA
SOFTWARE. VIA IS NOT OBLIGATED TO SUPPORT OR ISSUE UPDATES TO THE VIA SOFTWARE.
5.
Limitation on Liability. TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE
LAW, UNDER NO CIRCUMSTANCES SHALL VIA BE LIABLE TO YOU OR ANY
OTHER PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
ECONOMIC LOSS OR COMMERCIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THIS VIA SOFTWARE, EVEN IF VIA HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES.
6.
Export Controls. By clicking on the "I ACCEPT"
button, you agree that the VIA Software will not be shipped, transferred,
or exported into any country or used in any manner prohibited by the United
States Export Administration Act or any other applicable export laws,
restrictions, or regulations.
7.
Termination. Your license will
automatically terminate without notice from VIA upon any failure by you to comply with the terms under
this Agreement. Upon termination, you must cease all use of the VIA SOFTWARE and destroy
the VIA
SOFTWARE along with all copies and merged portions in
any form.
This package should be installed on the system with VIA
This software package only supports Microsoft Windows©
Platforms. The setup program will detect the current platform and install
proper driver on your system. The supported platforms are list below:
Windows 95
Windows 98
Windows 98se
Windows Millennium
Windows NT4 Plus
service packs 6
Windows 2000 RTM
and above
Windows XP RTM
and above
Windows Server 2003 RTM and above
Windows XP-x64 RTM
and above
Windows Server 2003 SP1-x64 RTM and above
There are two operation
modes, Windows UI and command line, to execute installation and remove. The
most popular is the Windows UI mode that provides convenient user interface and
systematic operation. The command line mode, also called as silent mode, need
user append more parameters behind SETUP.EXE as answer to make the setup
program silence without pop any dialogs.
There are
possible two types setup package you may have. One is compressed as a zip file
includes visible setup and driver files. Another one is made as a
self-extracted-execution file. In the following, we will show you the steps to
complete driver installation and remove with both package types.
If the downloaded file is ZIP-compressed format, please
extract it to proper location in your hard disk first. Then launch the
SETUP.EXE by double-clicking. Otherwise, you could double-click the
self-extracted-execution file and wait for few seconds for the self-extraction.
The extracted file will be deleted automatically after setup has been terminated.
If it is the first time to execute the setup package,
you will only have the choice of installation.
After the first time execution, you could have choice to
make Update and Remove. You will see two options, Update and Remove in the
first shown dialog. If you are going to update the driver, please active the
Update radio button and press next button to enter next steps. Else, if you are
going to remove the installed driver in your system, please active the Remove
radio button and press next button to enter next steps.
There is another path to remove the installed driver is
to go through “Add Remove Programs” service of control panel. An uninstall item
is added after install , VIA Platform Device Manager,
to handle all the installed VIA driver components. You could select the VIA IDE
Bus Master item in the list box of Remove option.
The silent mode are usually applied to system
maintainer for servicing hundreds systems that wont have interactive user
interface. They would execute the setup through command line in console or
batch file execution without closing any popped dialog popped or pressing next
buttons. In addition, the command line parameters of these two types of
downloaded file format get few differences.
In this type package, you could see a setup.exe in
those extracted files. User could append parameters behind setup.exe as command
line in console.
The present command line parameters
are: -s and /z"reboot;remove;kompnt:xx,yy,zz"
|
Parameter |
Description |
|
-s |
It
is a required command line parameter to enable silent mode operation. If this
parameter is missed, the setup |
|
-zParam1;K;ParamN |
It
passes predefined parameters to SETUP.EXE. Each parameter, Param1;K;ParamN, should be separated with semicolons. The
predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode
operation completed. remove It is a switch to cause Setup.exe to remove components. If
this parameter is absent, then SETUP.EXE will install components. kompnt:xx,yy,zz It is an optional parameter to
assign specific component in this package to be install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Examples:
|
Command
line |
Execution
|
|
setup.exe
-s |
Silent
install all included components but not reboot the computer. |
|
setup.exe
-s /z"reboot" |
Silent
install all component and reboot the computer. |
|
setup.exe
-s /z"reboot;remove" |
Silent
uninstall all include component and reboot the computer. |
|
setup.exe
-s /z"remove" |
Silent
uninstall all components but not reboot the computer. |
|
setup.exe
-s /z"kompnt:VIAMACH,VIAUDIO" |
Silent
install VIAMACH and VIAUDIO components only |
|
setup.exe
-s /z"remove;kompnt:VIAMACH,VIAUDIO" |
Silent
uninstall VIAMACH and VIAUDIO components only |
This type is a single
self-extracted-execution file. All necessary files are all integrated together
so that user does not need to extract it to specific folder for operation.
There is extra parameter to make the self-extracted shell to be in silent mode.
The present command line
parameters are -s -a, -s and /z"reboot;remove;kompnt:xx,yy,zz"
|
Parameter |
Description |
|
-s
-a |
It
is a required command line parameter to make the self-extracted shell program
to be in silent mode. And it should be the first parameter in command line. |
|
-s |
It
is a required command line parameter to enable silent mode operation. If this
parameter is missed, the setup |
|
-zParam1;K;ParamN |
It
passes predefined parameters to SETUP.EXE. Each parameter, Param1;K;ParamN, should be separated with semicolons. The
predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode
operation completed. remove It is a switch to cause Setup.exe to remove components. If
this parameter is absent, then SETUP.EXE will install components. kompnt:xx,yy,zz It is an optional parameter to
assign specific component in this package to be install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Under Windows 2000 and later
OS, while user intends to install OS on the disk attached on the RAID
controller, they have to prepare a floppy driver disk including the pre-OS
installation files and press “F
The driver disk files
had been prepared in this package. Please follow the steps to prepare it.
1.
Make sure the target system is already install floppy
drive
2.
Prepare a empty and valid floppy disk
3.
Copy all files under \DRVDISK to the floppy without losing
4.
Power on the target machine and boot from the Boot CD. And
press “F
5.
After the booting process ask you to insert the floppy
disk, please insert the prepared floppy disk to the floppy drive and press
enter
6.
Choose the proper item to fit the OS and RAID controller
you are installing. Each item shows the matched OS for it.
The default-supported language in this
package is in English.
If the executed Windows OS is in an un-supported
language to this package, the user interface will be represented in
English.
This setup package support 33
languages as below
|
Chinese(Simplified), |
Chinese (Traditional), |
Indonesian, |
|
Japanese, |
Korean, |
Russian, |
|
Thai, |
Turkish. |
|
|
Basque, |
Bulgarian, |
Catalan, |
|
Croatian, |
Czech, |
Danish, |
|
Dutch, |
English, |
Finish, |
|
French( |
French(France), |
German, |
|
Greek, |
Hungarian, |
Italian, |
|
Norwegian, |
Polish, |
Portuguese(Brazi), |
|
Portuguese( |
Romanian, |
Serbian, |
|
Slovak, |
Slovenian, |
Spanish, |
|
Swedish. |
|
|
All the language sequence is arranged as alphabetical.
All
copyrights are reserved by VIA Technologies, Inc. http://www.via.com.tw/