VIA MSP Card Reader Software Package Installation
Guide
Updated:
.
Application License Agreement
.
Distribution Package Contents
This
readme file provides information on VIA VX800(U)/VX810(U) software packages. VIA
Technologies assumes no responsibility for
any errors in this document. Any part of document MUST NOT be reproduced, transmitted, or translated into any language,
or in any form without the prior written permission of VIA Technologies Inc.
This
"VIA PCI Card Reader Software
Package" is used to install the drivers which are needed for using the VX800(U)/VX810(U) PCI Card Reader controllers.
The
supported platforms are described in System Requirement section.
Please
read carefully before you download, install, or use any VIA SOFTWARE. VIA
SOFTWARE means the software program you are currently trying to download, and
all related updates supplied by VIA Technologies, Inc. (VIA).
By clicking on the I ACCEPT button, and by downloading and installing the VIA
SOFTWARE, you accept all the terms and conditions of this Agreement. If you do not agree to the terms and
conditions of this Agreement, do not click the “I ACCEPT” button or use the VIA
SOFTWARE.
Upon
your acceptance of this Agreement, subject to the terms and conditions set
forth herein, VIA hereby grants to you a limited, non-exclusive,
non-transferable, worldwide license to use the VIA SOFTWARE as follows:.
Restrictions. You are not allowed to modify,
disassemble, decompile, or reverse-engineering the VIA SOFTWARE, or remove any
proprietary notice or label on the VIA SOFTWARE. You may not transfer or distribute
this software to any third party
Use of Software. The VIA
SOFTWARE is licensed for personal use and may only be used in
conjunction with VIA products. If you wish to use the VIA SOFTWARE for commercial or any other purpose,
please contact VIA directly.
Ownership and Copyrights. The VIA SOFTWARE and the accompanying
documentation are licensed, not sold, to you. All title and copyrights in and
to the VIA SOFTWARE (including but not limited to all images, photographs,
animations, video, audio, music, text, and other information
incorporated into the VIA SOFTWARE), the accompanying printed materials, and
any copies of the VIA SOFTWARE, are owned by VIA, or its third party
suppliers. The VIA SOFTWARE is protected
by copyright laws and international treaty provisions.
Disclaimer of Warranty. VIA MAKES NO REPRESENTATIONS ABOUT THE
SUITABILITY, USE, OR PERFORMANCE OF THE VIA SOFTWARE FOR ANY
PURPOSE. THE VIA SOFTWARE IS PROVIDED "AS IS," AND VIA DISCLAIMS, TO
THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW, ALL EXPRESS OR IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT WITH RESPECT TO THE VIA
SOFTWARE. VIA IS NOT OBLIGATED TO SUPPORT OR ISSUE UPDATES TO THE VIA SOFTWARE.
Limitation on Liability. TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE
LAW, UNDER NO CIRCUMSTANCES SHALL VIA BE LIABLE TO YOU OR ANY
OTHER PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
ECONOMIC LOSS OR COMMERCIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THIS VIA SOFTWARE, EVEN IF VIA HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES.
Export
Controls. By clicking on the "I
ACCEPT" button, you agree that the VIA Software will not be shipped, transferred,
or exported into any country or used in any manner prohibited by the United
States Export Administration Act or any other applicable export laws,
restrictions, or regulations.
Termination. Your license will automatically
terminate without notice from VIA upon any failure by you to comply with the terms under this
Agreement. Upon termination, you must cease all use of the VIA SOFTWARE and destroy
the VIA
SOFTWARE along with all copies and merged portions in
any form.
This package should be installed on the system with
VX800/VX810 chipsets. The setup program will not support to be installed on
other vendor chipsets.
This software package only supports Microsoft Windows©
Platforms. The setup program will detect the current platform and install
proper driver on your system. The supported platforms are list below:
Windows XP RTM and above
Windows Server 2003 RTM and above
Windows
Windows 7 RTM and above
Windows XP RTM
and above
Windows Server 2003 RTM
and above
Windows
Windows 7 RTM and above
The setup program will display the released data and
version for this package at dialog title.
There is specific version syntax for package
identification:
The X is
the major version of this package; and YZ represents the minor version.
The
alphabetic is always appended after version field to represent the
qualification by Windows Hardware Qualification Lab. The A means the first
package for the same driver binary, B means the second released package for the
same driver binary, and so on.
In this section, we show the detail file list of ZIP-compressed package
in which include setup and driver files.
0X0409.INI, INSTMSIA.EXE, INSTMSIW.EXE, ISSCRIPT.MSI,
License.mlf, PCIENUM.SYS, README.html, SETUP.EXE,
Setup.ini, SETUP.ISS, SETUP.MLF, SETUP.SCF,
viasetup.dll, VIASetup.msi, English.slf, asia.slf,
europe1.slf,
europe2.slf, europe3.slf, europe3.slf,
165x300.bmp, 500x60.bmp
VCRDrv\component.cif,
VCRDrv\CardRder.DLL, VCRDrv\CardReader.EXE
Driver
files:
Windows XP
|
VCRDrv\XP\x86\VCRDRX32.SYS VCRDrv\XP\x86\VCRDR32.INF VCRDrv\XP\x86\vcrdrico.dll VCRDrv\XP\x86\VCRDRX32.CAT VCRDrv\XP\x86\WDFCoInsaller01007.DLL |
|
VCRDrv\XP\x64\VCRDRX64.SYS VCRDrv\XP\x64\VCRDR64.INF VCRDrv\XP\x64\vcrdrico.dll VCRDrv\XP\x64\VCRDRX64.CAT VCRDrv\XP\x64\WDFCoInsaller01007.DLL |
Windows Server 2003
|
VCRDrv\SRV2003\x86\VCRDRX32.SYS VCRDrv\SRV2003\x86\VCRDR32.INF VCRDrv\SRV2003\x86\vcrdrico.dll VCRDrv\SRV2003\x86\VCRDRX32.CAT VCRDrv\SRV2003\x86\WDFCoInsaller01007.DLL |
|
VCRDrv\SRV2003\x64\VCRDRX64.SYS VCRDrv\SRV2003\x64\VCRDR64.INF VCRDrv\SRV2003\x64\vcrdrico.dll VCRDrv\SRV2003\x64\VCRDRX64.CAT VCRDrv\SRV2003\x64\WDFCoInsaller01007.DLL |
Windows
|
VCRDrv\VISTA\x86\VCRDRX32.SYS VCRDrv\VISTA\x86\VCRDR32.INF VCRDrv\VISTA\x86\vcrdrico.dll VCRDrv\VISTA\x86\VCRDRX32.CAT VCRDrv\VISTA\x86\WDFCoInsaller01007.DLL |
|
VCRDrv\VISTA\x64\VCRDRX64.SYS VCRDrv\VISTA\x64\VCRDR64.INF VCRDrv\VISTA\x64\vcrdrico.dll VCRDrv\VISTA\x64\VCRDRX64.CAT VCRDrv\VISTA\x64\WDFCoInsaller01007.DL |
Windows 7
|
VCRDrv\WIN7\x86\VCRDRX32.SYS VCRDrv\WIn7\x86\VCRDR32.INF VCRDrv\WIN7\x86\vcrdrico.dll VCRDrv\win7\x86\VCRDRX32.CAT VCRDrv\win7\x86\WDFCoInsaller01007.DLL |
|
VCRDrv\win7\x64\VCRDRX64.SYS VCRDrv\win7\x64\VCRDR64.INF VCRDrv\win7\x64\vcrdrico.dll VCRDrv\win7\x64\VCRDRX64.CAT VCRDrv\win7\x64\WDFCoInsaller01007.DL |
There are two
operation modes, Windows UI and command line, to execute installation and
remove. The most popular is the Windows UI mode that provides convenient user
interface and systematic operation. The command line mode, also called as
silent mode, need user append more parameters behind SETUP.EXE as answer to
make the setup program silence without pop any dialogs.
There are
possible two types setup package you may have. One is compressed as a zip file
includes visible setup and driver files. Another one is made as a
self-extracted-execution file. In the following, we will show you the steps to
complete driver installation and remove with both package types.
If the downloaded file is ZIP-compressed format, please
extract it to proper location in your hard disk first. Then launch the
SETUP.EXE by double-clicking. Otherwise, you could double-click the self-extracted-execution
file and wait for few seconds for the self-extraction. The extracted file will
be deleted automatically after setup has been terminated.
If it is the first time to execute the setup package,
you will only have the choice of installation.
After the first time execution, you could have choice
to make Update and Remove. You will see two options, Update and Remove in the
first shown dialog. If you are going to update the driver, please active the Update
radio button and press next button to enter next steps. Else, if you are going
to remove the installed driver in your system, please active the Remove radio
button and press next button to enter next steps.
There is another path to remove the installed driver is
to go through “Add Remove Programs” service of control panel. An uninstall item
is added after install , VIA Platform Device Manager,
to handle all the installed VIA driver components.
The silent mode are usually applied to system
maintainer for servicing hundreds systems that wont have interactive user
interface. They would execute the setup through command line in console or
batch file execution without closing any popped dialog popped or pressing next
buttons. In addition, the command line parameters of these two types of
downloaded file format get few differences.
In this type package, you could see a setup.exe in
those extracted files. User could append parameters behind setup.exe as command
line in console.
The present command line parameters
are: -s and /z"reboot;remove:xx,yy,zz"
|
Parameter |
Description |
|
-s |
It
is a required command line parameter to enable silent mode operation. If this
parameter is missed, the setup |
|
-zParam1;K;ParamN |
It
passes predefined parameters to SETUP.EXE. Each parameter, Param1;K;ParamN,
should be separated with semicolons. The
predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode
operation completed. remove It is a switch to cause Setup.exe to remove components. If
this parameter is absent, then SETUP.EXE will install components. kompnt:xx,yy,zz It is an optional parameter to assign
specific component in this package to be install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Examples:
|
Command line |
Execution
|
|
setup.exe -s |
Silent install all
included components but not reboot the computer. |
|
setup.exe -s /z"reboot" |
Silent install all
component and reboot the computer. |
|
setup.exe -s /z"reboot;remove" |
Silent uninstall all
include component and reboot the computer. |
|
setup.exe
-s /z"remove" |
Silent uninstall all
components but not reboot the computer. |
Under Windows 2000 and later
OS, except Windows VISTA and Windows VISTA-x64, while user intends to install
OS on the disk attached on the RAID controller, they have to prepare a floppy
driver disk including the pre-OS installation files and press “F
The driver disk files
had been prepared in this package. Please follow the steps to prepare it.
1.
Make sure the target system is already install floppy
drive
2.
Prepare a empty and valid floppy disk
3.
Copy all files under \DRVDISK to the floppy without losing
4.
Power on the target machine and boot from the Boot CD. And
press “F
5.
After the booting process ask you to insert the floppy
disk, please insert the prepared floppy disk to the floppy drive and press
enter
6.
Choose the proper item to fit the OS and RAID controller
you are installing. Each item shows the matched OS for it.
Under Windows VISTA and
Windows VISTA-x64, while user intends to install OS on the disk attached on the
RAID controller, they have to prepare a floppy driver disk including the pre-OS
installation files and press “load driver” while setup program prompt it.
The driver disk files
had been prepared in this package. Please follow the steps to prepare it.
1.
Make sure the target system is already install floppy
drive
2.
Prepare a empty and valid floppy disk
3.
Copy all files under \DRVDISK to the floppy without losing
4.
Power on the target machine and boot from the Boot CD. And
press “load driver” while the prompt appear on the setup programe
5.
insert the prepared floppy disk to the floppy drive
6.
Choose the proper inf
file based on the OS Version you are installing. Please select .\VISTA\x86\VSMRAID.inf for Windows
VISTA and .\VISTA\x64\ VSMRAID.INF for Windows
VISTA-x64
The default-supported language in this
package is in English.
If the executed Windows OS is in an
un-supported language to this package, the user interface will
be represented in English.
This setup package support 33
languages as below
|
Chinese(Simplified), |
Chinese (Traditional), |
Indonesian, |
|
Japanese, |
Korean, |
Russian, |
|
Thai, |
Turkish. |
|
|
Basque, |
Bulgarian, |
Catalan, |
|
Croatian, |
Czech, |
Danish, |
|
Dutch, |
English, |
Finish, |
|
French( |
French(France), |
German, |
|
Greek, |
Hungarian, |
Italian, |
|
Norwegian, |
Polish, |
Portuguese(Brazi), |
|
Portuguese( |
Romanian, |
Serbian, |
|
Slovak, |
Slovenian, |
Spanish, |
|
Swedish. |
|
|
All the language sequence is arranged as alphabetical.
Limitation:
Application
Compatibility:
All
copyrights are reserved by VIA Technologies, Inc. http://www.via.com.tw/